Automatic Gates Direct > Access Control
Switch2 Metal Proximity Reader
£200.00
Switch2 Metal Proximity Reader
About - For use with Switch2. Contained in a cast metal housing with a satin chrome finish. The result is a smart, rugged reader. Suitable for installation onto metal door frames, car park reader posts, etc.
Installation
- The reader is wired as shown on the control unit label. Backplate provided for accurate mounting.
Operation - Card/Keyfob is read by holding within close proximity to the reader. Once read, access is then granted or denied as appropriate. If access is granted the green LED flashes, if access is denied the red LED flashes.
For use with Switch2 Control Unit.
Switch2 Metal Proximity Reader consists of:
-
Metal Proximity reader
- Use with Switch2
- Metal construction
- Suitable for mounting on metal
- Supplied with security screws and key
- IPX7 rated - suitable for external use
- Available in Satin, Chrome or Brass finish
| Approximate Dimensions (mm) | 76 x 76 x 27mm |
| Power Supply In (V) | 12V D.C. |
| Current consumption (mA) |
110mA |
| Read Range (mm) |
40 - 50MM |
| Operating Temp (C) | -35º to 66ºC |
| Protection Rating | IPX7 |
About - For use with Switch2. Contained in a cast metal housing with a satin chrome finish. The result is a smart, rugged reader. Suitable for installation onto metal door frames, car park reader posts, etc.
Operation - Card/Keyfob is read by holding within close proximity to the reader. Once read, access is then granted or denied as appropriate. If access is granted the green LED flashes, if access is denied the red LED flashes.
| You may also be interested in |
