Automatic Gates Direct > Access Control
Switch2 Plastic P Series Proximity Reader
£135.00
Switch2 Plastic P Series Proximity Reader consists of:
-
Plastic P Series Proximity reader
- Use with Switch2
- Plastic construction
- Simple mounting
- Supplied with a choice of black or white fascias
- Low profile - less than 16mm deep
- IPX7 rated - suitable for external use
- 4 sizes available
| P38 Approximate Dimensions (mm) | 78 x 38mm |
| P50 Approximate Dimensions (mm) | 100 x 50mm |
| P75 Approximate Dimensions (mm) | 143 x 75mm |
| P200 Approximate Dimensions (mm) | 201 x 200mm |
| Power Supply In (V) | 12V D.C. |
| Current consumption (mA) |
120mA |
| Read Range (mm) |
40 - 60MM |
| Operating Temp (C) | -35º to 66ºC |
| Protection Rating | IPX7 |
About - For use with Switch2. The readers are supplied with a choice of black or white fascias. P series readers are available in four sizes.
Installation - The reader is wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate.
Operation - A Card/Keyfob is read by holding within close proximity of the reader. Once read, the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
| You may also be interested in |
