Automatic Gates Direct > Access Control
Compact Vandal-Proof Proximity Reader
£229.00
Compact Vandal-Proof Proximity Reader
About - PROXIMITY compact vandal proof reader is a single door access control system with all of the electronics within the housing of the reader. Compact systems can be installed to many doors over a site, all using the same cards. The compact vandal proof reader"s cylindrical construction means that all the control electronics may be buried in a wall. This reader is ideal where access control is required on a door at risk of vandalism.
Installation - The compact reader has two wires which connect to the lock and two wires which connect to the power supply. There are two wires for connection to an exit button if required. The vandal proof reader is buried into the wall. The reader should not be mounted into metal.
Operation - User tokens are valid and ready for use once installation is complete.
**For use as Stand-alone unit - no Switch2 Control unit needed.
CompactVandal-Proof Proximity Reader consists of:
-
1 x Vandal-Proof Proximity reader
- Use stand-alone
- Solution for vulnerable areas
- All cards are immediately valid
- The reader is buried in a wall or door frame
- Supplied with two coloured caps (Black & White)
- IPX7 rated - suitable for external use
| Approximate Dimensions - Tube (mm) | 20 x 60mm |
| Approximate Dimensions - Cap (mm) | 30 x 48 x 9mm |
| Power Supply In (V) | 12V D.C. |
| Current consumption (mA) |
110mA |
| Read Range (mm) |
40 - 80MM |
| Operating Temp (C) | -20º to 55ºC |
| Protection Rating | IPX7 |
About - PROXIMITY compact vandal proof reader is a single door access control system with all of the electronics within the housing of the reader. Compact systems can be installed to many doors over a site, all using the same cards. The compact vandal proof reader"s cylindrical construction means that all the control electronics may be buried in a wall. This reader is ideal where access control is required on a door at risk of vandalism.
Installation - The compact reader has two wires which connect to the lock and two wires which connect to the power supply. There are two wires for connection to an exit button if required. The vandal proof reader is buried into the wall. The reader should not be mounted into metal.
Operation - User tokens are valid and ready for use once installation is complete.
| You may also be interested in |
